Valves

BLV /PV Series

Products > Valves > Needle Valve

Features: In-line pattern Stainless Steel, Brass, A105 Compact design


NV Series

Products > Valves > Needle Valve

Features: In-Line or Angle pattern Stainless Steel, Brass, Alloy 400(Monel), A105 PTFE 2-piece chevron stem packing Metal-to-Metal Seat or PCTFE Soft Seat (Bubble Tight)


SV Series

Products > Valves > Needle Valve

Features: In-Line or Angle pattern Stainless Steel, Brass, Alloy 400(Monel) PTFE packing provides leak tight seal and long life cycle Metal-to-Metal Seat or PCTFE Soft Seat(Bubble Tight)


GB Series

Products > Valves > Needle Valve

Features: In-Line or Angle pattern Stainless Steel, Alloy 400(Monel), A105 High temperature grafoil packing Metal-to-Metal Seat Back seat stem for safety


SVH Series

Products > Valves > Needle Valve

Features: In-Line pattern Stainless Steel, Alloy 400(Monel), Duplex PTFE packing provides leak tight seal and long life cycle Metal-to-Metal Seat or PCTFE Soft Seat(Bubble Tight)


GH Series

Products > Valves > Needle Valve

Features: In-Line or Angle pattern Stainless Steel, Alloy 400(Monel), A105 High temperature grafoil packing Metal-to-Metal Seat Back seat stem for safety


RP Series

Products > Valves > Needle Valve

Features: In-Line pattern, Bi-direction flow Stainless Steel, Brass, Alloy 400(Monel) High flow capacity Delrin, PEEK or PCTFE seats Replaceable O-Ring Seal and Soft Seat Gauge Ports available


TG Series

Products > Valves > Needle Valve

Features: Compact Design Ensure safe relief of system pressure Valve vent line pressure to atmosphere


M Series

Products > Valves > Manifold Valve

Features: 2-Valves, 3-Valves, 5-Valves Manifolds designs Stainless Steel, Alloy 400(Monel), A105 Available direct or remote mounting Isolation, calibration and vent Available PTFE or Grafoil seats


Double Block & Bleed Valve

Products > Valves > DBB & Ball Valve

Features: Two ball One needle (OS & Y) Stainless Steel, Duplex, A105 Savings on space, weight, Installation and cost Increased safety Easy installation and maintenance PEEK or PCTFE seats Fire safety designed to API 607/6FA


116 & 118 Series

Products > Valves > DBB & Ball Valve

Features: In-line pattern Stainless Stee, A105 Compact design ROM-MoS₂seats Fire safety designed to API 607, BS 6755 Part2 Locking device available


CRYOGENIC Series

Products > Valves > Cryogenic Valve

Features: In-line pattern Stainless Steel Easy replacement of filter elements Dust cap functions as position indicator as well Bolted extension bonnet Fire safety designed to API 607/6FA, BS 6755 Part 2


PS Series

Products > Valves > Ball Valve & plug Valve

Features: Compact Design with one piece Hexagon body Stainless Steel, Brass, Allow 400(Monel), A105 PTFE seats


T Series

Products > Valves > Ball Valve & plug Valve

Features: 2-way or 3-way designs Stainless Steel, Alloy 400(Monel) Trunnion bearings eliminate galling Spring loaded ball Seats PCTFE seats


102 Series

Products > Valves > Ball Valve & plug Valve

Features: 2-way or 3-way designs Stainless Steel, Brass, Alloy 400(Monel), A105 PEEK or PCTFE seats Easy replacement of ball seats


105 Series

Products > Valves > Ball Valve & plug Valve

Features: 2-way or 3-way designs Stainless Steel, Brass, Alloy 400(Monel), A105 PVDF, PEEK or PCTFE seats Fire safety designed to API 607, BS 6755 Part 2 Locking device available


110P Series

Products > Valves > Ball Valve & plug Valve

Features: Low torque for operation Normally open type (N.O) & Normally close type (N.C) Locked normal position (open or close) for safety 100% factory tested before delivery


110 Series

Products > Valves > Ball Valve & plug Valve

Features: Compact Design with one piece Hexagon body Stainless Steel, Brass, Allow 400(Monel), A105 PTFE seats


112 Series

Products > Valves > Ball Valve & plug Valve

Features: Available in Multi Ports with 3-way 4-way, 5-way Stainless Steel, Brass, Allow 400(Monel) PTFE seats Two-piece seat fully encapsulates the ball Minimum dead space is easily cleaned


115 Series

Products > Valves > Ball Valve & plug Valve

Features: In-line pattern Stainless Steel, Brass, A105 POM-MoS₂seats Fire safety designed to API 607, BS 6755 Part 2 Locking device available


P Series

Products > Valves > Ball Valve & plug Valve

Features: In-line pattern Stainless Steel, Brass, Alloy 400(Monel) Throtting capability Easy replacement of plug and O-ring Viton O-Ring seats / Seals


SO Series

Products > Valves > Ball Valve & plug Valve

Features: In-line pattern Stainless Steel CF8M Long life cycle Easy swing out construction Anti-ststic device Fire safety designed to API 607, BS 6755 Part 2


700 Series

Products > Valves > Check & Relief Valve

Features: In-line pattern Satainless Steel, Brass, Allow 400(Monel) Poppet design Provide large flows Viton O-ring Seats / Seals


CVW Series

Products > Valves > Check & Relief Valve

Features: All Welded design provides excellent sealing of fluid Compact Design ZCR, Tube Butt weld, and Hy-Lok tube Fitting 100% Helium leak tested


RV Series

Products > Valves > Check & Relief Valve

Features: Angle pattern Stainless Steel External relief setting Provide large flows


CNG Series

Products > Valves > CNG Products

Features: Long life cycle and high temperature 1/4 turn on-off control AGA / CGA NGA 3.1 and ECE R110 Bi-directional flow Panel Mounting Disc spring live loaded 316 Stainless Steel


BL Series

Products > Valves > Bellows & Diaphragm Valve

Features: Metal to metal diaphragm seal Low particle entrapment 100% helium leak tested 10 Ra or 5 Ra microinch internal surface


BLF Series

Products > Valves > Bellows & Diaphragm Valve

Features: Metal to metal diaphragm seal Low particle entrapment 100% helium leak tested 10 Ra or 5 Ra microinch internal surface


DV Series

Products > Valves > Bellows & Diaphragm Valve

Features: 2-way Design 316L VOD Stainless Steel Metal bellows seal Long life cycle PCTFE seats


HPGR-400 Series

Products > Valves > Regulators

Features: Point-of-Use Free Poppet / Tied Diaphragm Type 10 Ra or 5 Ra Microinch Internal Surface Metal to metal body to diaphragm seal Low particle entrapment


HPGR-800 Series

Products > Valves > Regulators

Features: Point-of-Use Free Poppet / Tied Diaphragm Type 10 Ra or 5 Ra Microinch Internal Surface Metal to metal body to diaphragm seal Low particle entrapment


FI Filter

Products > Valves > Filter

Features: In-line pattern Stainless Steel, Brass Compact in-lone design Easy replacement of filter elements


FT Filter

Products > Valves > Filter

Features: Tee pattern Stainless Steel, Brass Easy replacement of filter elements Available by-pass Provided purging and sampling